Help For Blink Pro

Version 160 (Adrian Georgescu, 10/27/2014 10:49 am)

1 147 Adrian Georgescu
h1. Help for Blink Pro and Blink Lite for OSX
2 1 Tijmen de Mes
3 147 Adrian Georgescu
For help on Blink QT go "here":http://projects.ag-projects.com/projects/blinkqt/wiki/Help
4 65 Adrian Georgescu
5 66 Adrian Georgescu
[[KnownIssues|Known issues and critical bug fixes]]
6 1 Tijmen de Mes
7 147 Adrian Georgescu
[[MostEncounteredProblems| Most Encountered Problems]]
8 1 Tijmen de Mes
9 154 Adrian Georgescu
To use Blink you need a SIP account from a SIP service provider. Similar to using an email program, you must configure Blink with the account you have obtained from your service provider. If things do not work the way you expect, there can be several reasons. The cause may be located by Blink software itself, the network connectivity or the SIP Service Provider.  While Blink may not be bug free, based on experience so far most of the problems are related to the network connectivity (packet loss, presence of a broken SIP ALG router) or/and the SIP Service Provider (most provider only support Voice calls). It is not the end-user who should understand the mechanics about how things work, so the main responsibility of making sure that things work correct falls into the hands of the SIP service provider who must properly setup its SIP infrastructure. To eliminate some possible causes, try to use the built-in accounts provided by Blink, all features are known to be working using these accounts. 
10 154 Adrian Georgescu
11 1 Tijmen de Mes
12 150 Adrian Georgescu
h2. Refunds
13 1 Tijmen de Mes
14 150 Adrian Georgescu
If you purchased an application on Mac App Store you must ask Apple for the refund. Some web page describing the process is here http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
15 150 Adrian Georgescu
16 149 Adrian Georgescu
17 147 Adrian Georgescu
h2. Requesting Support 
18 1 Tijmen de Mes
19 157 Adrian Georgescu
To eliminate possible causes related to local network or service provider, please check if the problem can be reproduce by using the Free SIP Accounts provided with Blink.  
20 157 Adrian Georgescu
21 147 Adrian Georgescu
h3. Public Forum Discussions
22 1 Tijmen de Mes
23 147 Adrian Georgescu
Go to "Blink Support Forum":http://support.icanblink.com 
24 1 Tijmen de Mes
25 147 Adrian Georgescu
h3. Support from Developers
26 1 Tijmen de Mes
27 1 Tijmen de Mes
If you need support for a particular problem you can mail us directly to support@ag-projects.com. Please try this as a last resort as the answer may already be available on the discussion forum or other users may have encountered your problem while the developers may not.
28 1 Tijmen de Mes
29 157 Adrian Georgescu
h3. Sending A Crash Report
30 1 Tijmen de Mes
31 158 Adrian Georgescu
If the software crashes or fails to handle incoming or place outgoing calls you can send the logs for analysis as follows:
32 156 Adrian Georgescu
33 157 Adrian Georgescu
 * Make sure you run the last version available in the Mac App Store
34 157 Adrian Georgescu
 * Go to  menu Window -> Logs. Enable SIP (check box Everything and select all applications), Notifications and Engine logs 
35 156 Adrian Georgescu
 * Go to Preferences -> Advanced -> File Logging
36 157 Adrian Georgescu
 * Check boxes _Log SIP Signaling_, _Log Notifications_ and _Log Core Engine_
37 157 Adrian Georgescu
 * Click on the Purge Logs button
38 158 Adrian Georgescu
 * Repeat the action that causes the problem
39 156 Adrian Georgescu
 * Make an archive with:
40 158 Adrian Georgescu
41 157 Adrian Georgescu
  * All files in the folder _~/Library/Containers/com.agprojects.Blink/Data/Library/Application\ Support/Blink\ Pro/logs/_
42 160 Adrian Georgescu
  * /var/log/system.log  If the file is too big, you can filter the lines using In Terminal the command _grep Blink /var/log/system.log > activity.txt_ or by using the Console application
43 159 Adrian Georgescu
  * In case of complete software crash, the Blink crash report, you can find it using Console application
44 158 Adrian Georgescu
45 157 Adrian Georgescu
 * Send the archive to support@ag-projects.com
46 156 Adrian Georgescu
47 158 Adrian Georgescu
Don't forget to disable the logging once you are done with their collection.
48 147 Adrian Georgescu
49 1 Tijmen de Mes
h3. Non-critical Errors
50 147 Adrian Georgescu
51 141 Adrian Georgescu
Blink errors are logged in the OSX system log file _/var/log/system.log_. You can find them by opening _Applications -> Utilities -> Console_, selecting _LOG FILES -> system.log_ and typing Blink in the search bar. Please provide us with this information when you report the problem you encountered.
52 147 Adrian Georgescu
53 1 Tijmen de Mes
h3. Software Crashes
54 147 Adrian Georgescu
55 1 Tijmen de Mes
If you experience a software crash, please send the complete crash report available in the crash reporter window (just copy and paste from it). 
56 147 Adrian Georgescu
57 1 Tijmen de Mes
Crash reports are saved in _~/Library/Logs/DiagnosticReports/_.
58 147 Adrian Georgescu
59 1 Tijmen de Mes
h3. Configuration File
60 147 Adrian Georgescu
61 1 Tijmen de Mes
Blink accounts and settings are stored in a flat-text configuration file. 
62 147 Adrian Georgescu
63 147 Adrian Georgescu
 * Pro version: ~/Library/Containers/com.agprojects.Blink/Data/Library/Application Support/Blink Pro/config
64 147 Adrian Georgescu
 * Lite version: ~/Library/Containers/com.agprojects.BlinkLite/Data/Library/Application Support/Blink Lite/config
65 1 Tijmen de Mes
 * SIP2SIP version: ~/Library/Application Support/SIP2SIP/config
66 147 Adrian Georgescu
67 1 Tijmen de Mes
Do not edit this file manually. If you did and Blink does not start you must delete the file and start all over again. 
68 147 Adrian Georgescu
69 1 Tijmen de Mes
Please report your OS name and version and Blink version. You can find Blink version in menu _Blink -> About_.
70 147 Adrian Georgescu
71 1 Tijmen de Mes
Passwords are not stored in the configuration file but in the system keychain.
72 147 Adrian Georgescu
73 1 Tijmen de Mes
h2. Differences between Pro and Lite versions
74 147 Adrian Georgescu
75 1 Tijmen de Mes
Compared to Blink Lite, Blink Pro has the following extra features: 
76 155 Adrian Georgescu
77 155 Adrian Georgescu
 * OSX Integration (iCloud sync, iTunes pause, Address Book plugin, KeyChain support, Voice Over capability)
78 155 Adrian Georgescu
 * Unlimited number of SIP accounts
79 147 Adrian Georgescu
 * History browser for all media types
80 155 Adrian Georgescu
 * Phone number translations
81 147 Adrian Georgescu
 * Call transfer and call recording
82 147 Adrian Georgescu
 * LDAP server support
83 147 Adrian Georgescu
 * Incoming call web page integration
84 1 Tijmen de Mes
 * AddressBook plugin
85 147 Adrian Georgescu
 * More granular settings
86 1 Tijmen de Mes
87 147 Adrian Georgescu
SIP2SIP version is equivalent with Pro version but it can only use one account from sip2sip.info service.
88 1 Tijmen de Mes
89 147 Adrian Georgescu
90 1 Tijmen de Mes
h2. SIP Accounts
91 140 Adrian Georgescu
92 141 Adrian Georgescu
To use Blink, you need a SIP Account. At first start, Blink shows the _Add Account_ "window":http://icanblink.com/screenshots.phtml#enrollment that helps you configure the initial SIP Account.
93 140 Adrian Georgescu
94 147 Adrian Georgescu
You may configure Blink to use multiple SIP Accounts. To add a new SIP Account, go to menu _Preferences->Accounts_ and click the + button. The _Add Account_ window shows up and you can repeat the steps described above. After you have configured a SIP Account, you can see the status of the registration in the account list of _Main Window_ window. Solid color means that the account has successfully registered, gray color means that the registration has failed or is in progress. You can also see the status of the registration in the account list of _Preferences_ window. Green color means that the account has successfully registered, Red color the registration has failed and Yellow means that he registration process is in progress. A successful registration means that you are able to receive incoming calls with Blink.
95 141 Adrian Georgescu
 
96 1 Tijmen de Mes
h3. Add an Existing SIP Account
97 147 Adrian Georgescu
98 1 Tijmen de Mes
If you already have a SIP account from a SIP service provider, select this option then enter the SIP address in the form of _user@domain_ and the _password_. If the SIP service provider has set his infrastructure correctly, all server address settings will be automatically discovered by entering the SIP address and password. 
99 147 Adrian Georgescu
100 147 Adrian Georgescu
Unfortunately, most SIP service providers do not tell their users what their SIP address is.  Imagine your email provider giving you an account without telling you what is your email address…
101 147 Adrian Georgescu
102 147 Adrian Georgescu
The reason for making things complicated is that SIP service providers are either un-willing or incapable of setting up their DNS and SIP infrastructure correctly and confuse users about how to configure their SIP accounts.
103 147 Adrian Georgescu
104 147 Adrian Georgescu
Such providers typically provide separate username and server address information instead of a SIP address. The SIP address is composed by concatenating the username part and the server part format with an @ sign. Additional manual settings for the server address, transport and protocols can be made in Advanced Account Settings explained below.
105 147 Adrian Georgescu
106 147 Adrian Georgescu
h4. The username
107 147 Adrian Georgescu
108 147 Adrian Georgescu
Different SIP service providers may refer to this in such ways, they are all the same thing:
109 147 Adrian Georgescu
110 147 Adrian Georgescu
 * Username
111 147 Adrian Georgescu
 * Account number
112 147 Adrian Georgescu
 * Authentication Name
113 147 Adrian Georgescu
 * Login name
114 147 Adrian Georgescu
 * Phone number
115 147 Adrian Georgescu
 * Extension number
116 147 Adrian Georgescu
 * Number
117 147 Adrian Georgescu
118 147 Adrian Georgescu
h4. The server
119 147 Adrian Georgescu
120 147 Adrian Georgescu
Different SIP service providers may refer to this in such ways, they are all the same thing:
121 147 Adrian Georgescu
122 147 Adrian Georgescu
 * Server name
123 147 Adrian Georgescu
 * Server address
124 147 Adrian Georgescu
 * IP address
125 147 Adrian Georgescu
 * Proxy address
126 147 Adrian Georgescu
 * Outbound Proxy
127 147 Adrian Georgescu
 * Domain
128 147 Adrian Georgescu
 * Realm
129 147 Adrian Georgescu
 * SIP server
130 147 Adrian Georgescu
 * SIP registrar
131 147 Adrian Georgescu
132 147 Adrian Georgescu
Concatenate the username part and the server part as follows:
133 147 Adrian Georgescu
134 147 Adrian Georgescu
username@server
135 1 Tijmen de Mes
136 141 Adrian Georgescu
h3. Create a Free SIP Account
137 147 Adrian Georgescu
138 1 Tijmen de Mes
Use this option if you do not have a SIP Account, Blink can create one for you using the free service provided by SIP2SIP. All Blink features are supported by this service.
139 1 Tijmen de Mes
140 1 Tijmen de Mes
For more information about the features of the SIP service go to "http://sip2sip.info":http://wiki.sip2sip.info
141 147 Adrian Georgescu
142 1 Tijmen de Mes
It is recommended that you always create such account to benefit of the features beyond VoIP provided by Blink. Using a sip2sip.info account you can sync the address book between multiple instances of Blink, bridge to XMPP domains and create multi party conferences.
143 147 Adrian Georgescu
144 147 Adrian Georgescu
h3. iCloud sync
145 147 Adrian Georgescu
146 147 Adrian Georgescu
The default option is to sync the new account across all computers configured for the the same iCloud account. This means that any changes to any account will be synchronised across all your computers running Blink.
147 1 Tijmen de Mes
148 141 Adrian Georgescu
h3. Advanced Account Settings
149 135 Adrian Georgescu
150 1 Tijmen de Mes
h4. Outbound Proxy
151 1 Tijmen de Mes
152 1 Tijmen de Mes
If the SIP provider does not have proper DNS records set for his domain to point to its SIP server address and port numbers as defined by RFC3263, Blink will not be able to auto-discover its location. In such case you must set the Outbound Proxy setting in _Preferences -> SIP Account -> Advanced -> SIP Signaling_. Also you can use this setting to force a specific transport or port different than the ones discovered from DNS. The outbound proxy format is _host.example.com:5060;transport=udp_.
153 1 Tijmen de Mes
154 1 Tijmen de Mes
h2. Main Interface
155 1 Tijmen de Mes
156 1 Tijmen de Mes
Blink presents a _Contacts driven_ "interface":http://icanblink.com/screenshots.phtml#main_interface as the main window. The design allows to locate a Contact then to start an action for it, for example to start an _Audio Call_. You can toggle to and from a dial-pad interface in the _Contacts_ menu.
157 1 Tijmen de Mes
158 138 Tijmen de Mes
The main interface can be collapsed into a "compact mode":http://icanblink.com/screenshots.phtml#collapsed_gui that hides the Contact List or dialpad. Click on the *+* Green button of the window to collapse and expand the main interface.
159 1 Tijmen de Mes
160 1 Tijmen de Mes
Hover the mouse over the GUI elements to see a short description of their function.
161 147 Adrian Georgescu
162 140 Adrian Georgescu
h3. SIP Account
163 147 Adrian Georgescu
164 1 Tijmen de Mes
You can select the SIP Account used for outbound sessions in the _Accounts drop down box_ presented on the top of the main interface.
165 147 Adrian Georgescu
166 147 Adrian Georgescu
h4. Bonjour Account
167 147 Adrian Georgescu
168 147 Adrian Georgescu
_Bonjour Account_ is a special type of account that is designed to announce itself and discover other neighbours on the local area network. This account does not require a server or SIP service in order to operate.
169 1 Tijmen de Mes
170 141 Adrian Georgescu
h3. Search Bar
171 115 Adrian Georgescu
172 1 Tijmen de Mes
The Search bar is used for finding an existing contact or for entering a SIP address or telephone number.
173 1 Tijmen de Mes
174 1 Tijmen de Mes
To search for a contact in Blink's _Contacts List_, system _Address Book_ and optionally configured LDAP directory of the active account, fill in the name in the _Search Bar_. You may select a Contact that matched the typed text or use the typed text as the Contact for the next action.
175 1 Tijmen de Mes
176 1 Tijmen de Mes
Use the buttons presented at the bottom of the main window to start a session to the current selected Contact or press on _Add Contact_ to add the typed address to the _Contacts List_.
177 1 Tijmen de Mes
178 1 Tijmen de Mes
Pressing enter or return after entering text in the search bar will start an audio call to that address.
179 1 Tijmen de Mes
180 1 Tijmen de Mes
h3. Contacts List
181 147 Adrian Georgescu
182 1 Tijmen de Mes
Contacts can be organized in Groups. The Groups support ordering and can be collapsed or expanded when clicking on their left-side triangle. Groups can be dragged in different order. Contacts can be dragged from one group to another, they are sorted by name.
183 147 Adrian Georgescu
184 147 Adrian Georgescu
 * Right click on a Contact to see all possible actions for each of them.
185 1 Tijmen de Mes
 * Right click on a Group to see all possible actions for each of them.
186 147 Adrian Georgescu
187 1 Tijmen de Mes
h4. Address Book Group
188 1 Tijmen de Mes
189 1 Tijmen de Mes
The group named _Address Book_ cannot be deleted, it is dynamically populated with entries from the system _Address Book_. To reload changes made in the _Address Book_ collapse and expand the group again.
190 1 Tijmen de Mes
191 1 Tijmen de Mes
For Address Book entries, to have a SIP Address recognized by Blink you must have entries in either Email or URL sections that start with the _sip:_ prefix.
192 1 Tijmen de Mes
193 1 Tijmen de Mes
One can initiate an audio call using Blink Pro directly from the AddressBook application by clicking on the Phone, Email or URL fields of an AddressBook contact. For this you must install the AddressBook plugins available at:
194 1 Tijmen de Mes
195 1 Tijmen de Mes
"http://download.ag-projects .com/BlinkABPlugins/":http://download.ag-projects.com/BlinkABPlugins/
196 147 Adrian Georgescu
197 1 Tijmen de Mes
The plugins work with Blink Pro version only.
198 147 Adrian Georgescu
199 1 Tijmen de Mes
h4. Bonjour Neighbours Group
200 1 Tijmen de Mes
201 1 Tijmen de Mes
_Bonjour Neighbours_ appear in the _Contacts List_ as a separate Group. When selecting _Bonjour_ as the default account, _Bonjour Neighbours_ group is expanded and moved on top of the Contacts list. When changing back to a regular SIP Account, the groups in the Contacts list reshuffle to their previous positions.
202 1 Tijmen de Mes
203 1 Tijmen de Mes
Chat sessions are automatically accepted from Bonjour Neighbours.
204 1 Tijmen de Mes
205 1 Tijmen de Mes
Audio sessions can be automatically accepted based on the correspondent setting from Account menu.
206 147 Adrian Georgescu
207 147 Adrian Georgescu
h4. History Groups
208 147 Adrian Georgescu
209 147 Adrian Georgescu
Special groups can be enabled to display Incoming, Missed and Outgoing Calls. Entries can be individually hidden and the period of the calls can be selected
210 147 Adrian Georgescu
211 147 Adrian Georgescu
h4. Online Group
212 147 Adrian Georgescu
213 147 Adrian Georgescu
This special group displays contacts that have published availability information.
214 123 Tijmen de Mes
215 128 Tijmen de Mes
h4. Edit Contact
216 138 Tijmen de Mes
217 141 Adrian Georgescu
You can edit a Contact by right clicking on it and select Edit menu option. _Edit Contact_ "window":http://icanblink.com/screenshots.phtml#add_contact appears. To set the _Icon for the Contact_, click on the Icon area, a file selection dialog appears.
218 138 Tijmen de Mes
219 138 Tijmen de Mes
h4. Add Contact
220 147 Adrian Georgescu
221 123 Tijmen de Mes
You can add a Contact to the _Contacts List_ by clicking on the groups icon button presented on the bottom left of the main interface. _Add Contact_ "window":http://icanblink.com/screenshots.phtml#add_contact appears.
222 134 Tijmen de Mes
223 141 Adrian Georgescu
h4. Server Storage
224 134 Tijmen de Mes
225 141 Adrian Georgescu
If a contact is associated with an account and the SIP service that provides the account has XCAP storage capabilities, the contact is then also stored on the XCAP server. Multiple Blink instances can be synchronized in real time by using this feature. If your particular SIP service does not support XCAP storage, just add a SIP account from within Blink.
226 141 Adrian Georgescu
227 128 Tijmen de Mes
228 138 Tijmen de Mes
h3. Start Session
229 128 Tijmen de Mes
230 138 Tijmen de Mes
Use the buttons presented at the bottom of the main window to start a session to the current selected Contact.
231 138 Tijmen de Mes
232 138 Tijmen de Mes
Clicking on _Return key_ or double-clicking a Contact will start the default session type depending on the preferred media configured for each Contact. The default action is to start an _Audio Call_.
233 147 Adrian Georgescu
234 134 Tijmen de Mes
h2. Alert Panel
235 147 Adrian Georgescu
236 134 Tijmen de Mes
Incoming session requests bring up the "Alert Panel":http://icanblink.com/screenshots.phtml#alert_panel</em>. Click on the _Accept Button_ to accept a session request. There are two options for rejecting an incoming session request:
237 141 Adrian Georgescu
238 141 Adrian Georgescu
* Click on the _Reject button_. The session is rejected with SIP response code 603 and all other SIP devices registered for the same account stop ringing. Forwarding to voicemail or other destinations, when available in the SIP server is also cancelled. You must use this option to terminate all call processing associated with the request.
239 141 Adrian Georgescu
* Click on the _Busy button_. Blink sends a 486 code back to the caller and stops ringing, other SIP devices keep ringing and forwarding to other destinations remains active as set in the SIP server. You must use this option when you want to pick up the call at a different location or allow the Server to perform other pre-configured routing decisions.
240 141 Adrian Georgescu
241 138 Tijmen de Mes
When the _Answering Machine_ is enabled, a countdown appears in the Alert Panel. While the countdown counts you can still disable the _Answering Machine_ from the Account menu.
242 138 Tijmen de Mes
243 138 Tijmen de Mes
The currently selected input and output audio devices are showed for incoming Audio Call requests.
244 138 Tijmen de Mes
245 138 Tijmen de Mes
h2. Audio Calls
246 138 Tijmen de Mes
247 138 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-AudioSessions.jpg!
248 141 Adrian Georgescu
_Audio Calls_ are displayed in the lateral "drawer":http://icanblink.com/screenshots.phtml#audio_sessions attached to the main interface.
249 141 Adrian Georgescu
250 141 Adrian Georgescu
To start an _Audio Call_, select an existing contact or enter a SIP address or telephone number in the search bar. Once text is entered in the search bar just press enter to start an audio call to that address. Alternatively, you can turn on the dialpad in the Contacts menu and press its keys.
251 141 Adrian Georgescu
252 141 Adrian Georgescu
When a Contact is selected, you may click on the _Green Handset_ located at the bottom of the main interface or right click on thr Contact and select _Start Audio Session_ from the contextual menu. For each new call an entry is added to the _Audio Calls_ drawer.
253 141 Adrian Georgescu
254 141 Adrian Georgescu
To switch between multiple calls just click on another call in the audio sessions drawer. When switching to a particular session, the audio stream is connected to the input and output device and all other Audio Calls are put on hold.
255 141 Adrian Georgescu
256 141 Adrian Georgescu
To add _Chat_ to an existing _Audio Call_, right click on the session displayed in the Audio Drawer and select an _Add Chat_
257 141 Adrian Georgescu
258 141 Adrian Georgescu
To mute your microphone click on the bottom right microphone icon. To un-mute click it again.
259 147 Adrian Georgescu
260 141 Adrian Georgescu
h3. Audio Codecs
261 141 Adrian Georgescu
262 141 Adrian Georgescu
Audio codecs can be set in _Preferences -&gt; Advanced -&gt; RTP Media_ section and can be overwritten per account in _Advanced -&gt; RTP Media section_. By default, the audio codecs are prioritized to allow for highest quality and second, compatibility with SIP services.
263 147 Adrian Georgescu
264 141 Adrian Georgescu
If you have changed the defaults or want to set the codecs manually, for high quality conversations is recommended to use OPUS, Speex, G.722 codec order and leave PCMA and PCMU enabled for compatibility reasons. 
265 147 Adrian Georgescu
266 140 Adrian Georgescu
Some details about the codecs used by Blink:
267 147 Adrian Georgescu
268 147 Adrian Georgescu
* OPUS is the best codec choice covering full human audible spectrum and requires between 20 and 60kbit/s network bandwidth. This codec is available in Blink Pro 3.0.
269 147 Adrian Georgescu
* Speex is a high quality codec that is often built in softphones covering up to 16kHz audio spectrum and requires about 50kbit/s network bandwidth
270 147 Adrian Georgescu
* G.722 is the most compatible wideband codec supported by both software and hardware phones covering 11kHz audio spectrum and requires about 100kbit/s network bandwidth
271 147 Adrian Georgescu
* PCMA (G711A) and PCMU (G711U) are the most interoperable codecs narrowband that work with any device covering up to 4kHz audio spectrum (telephone quality)  and requires about 100kbit/s network bandwidth
272 147 Adrian Georgescu
* GSM and iLBC use less bandwidth than the other codecs but they have less support in other devices and cover up to 4kHz audio spectrum and requires up to 40kbit/s network bandwidth
273 147 Adrian Georgescu
274 147 Adrian Georgescu
h3. Best Speech Quality
275 147 Adrian Georgescu
276 147 Adrian Georgescu
To obtain best audio quality for speech you must:
277 147 Adrian Georgescu
278 147 Adrian Georgescu
 * Use a wideband codec like Speex, G.722 or OPUS
279 147 Adrian Georgescu
 * Have Acoustic Echo Cancellation enabled in Blink Audio Preferences, this will set the internal sampling rate to 32kHz covering up to 16kHz audio spectrum
280 147 Adrian Georgescu
 * Enable Ambient Noise Reduction in System Sound Preferences, this will remove the fan and other low frequency noises
281 147 Adrian Georgescu
 * If available bandwidth is an issue, use OPUS, Speex, G722 codecs order in Advanced RTP media preferences
282 147 Adrian Georgescu
283 147 Adrian Georgescu
You may use any headset or no headset (speakerphone mode).
284 147 Adrian Georgescu
285 147 Adrian Georgescu
h3. Best Studio Quality
286 147 Adrian Georgescu
287 147 Adrian Georgescu
To obtain best possible audio quality and remove all delays and distortions of the original signals introduced by the computer software and hardware you must do the following:
288 147 Adrian Georgescu
289 147 Adrian Georgescu
 * Use a high quality headsets and microphones (low delay at least 41000 Hz sample rate)
290 147 Adrian Georgescu
 * Disable Acoustic Echo Cancellation (AEC) in Blink Audio Preferences. This will disable the built-in noise reduction and echo cancellation algorithms as well as increasing the internal sampling rate to 48kHz
291 147 Adrian Georgescu
 * Disable Ambient Noise Reduction in System Sound Preferences
292 147 Adrian Georgescu
 * Use OPUS codec, with the AEC disabled, it will cover up to 20kHz audio spectrum
293 1 Tijmen de Mes
294 57 Adrian Georgescu
h3. DTMF
295 1 Tijmen de Mes
296 141 Adrian Georgescu
Dial tones are used to interact with PBX and IVR systems or legacy PSTN gateways. To send DTMF tones, focus the Audio Call by clicking on it. The current call is already focused if you just started it. What you then type on the keyboard is automatically translated into DTMF tones. Alpha-numeric keys are translated into numeric DTMF keys as they are on a numeric telephone keypad. Also you may use the dialpad for this purpose.
297 147 Adrian Georgescu
298 1 Tijmen de Mes
If a telephone number with a # sign is dialed, what comes after the # sign will be automatically entered as DTMF codes once the call is connected. Supported DTMF codes are 0-9&#42;#. You can use the comma sign ',' to insert a one second pause (version &gt;=1.5.1). You can use other delimiter by setting it in Phone Numbers advanced section of the SIP Account. 
299 147 Adrian Georgescu
300 147 Adrian Georgescu
You can paste a string containing 0 to 9 digits, # and * from the Clipboard in the active audio call. These are then sent out as DTMF codes.
301 1 Tijmen de Mes
302 1 Tijmen de Mes
h3. Hangup
303 1 Tijmen de Mes
304 1 Tijmen de Mes
To hangup click on the _Red handset_ displayed for each Audio Session in the right hand side of the drawer or press the Escape key.
305 1 Tijmen de Mes
306 1 Tijmen de Mes
h3. Hold/Unhold
307 1 Tijmen de Mes
308 33 Tijmen de Mes
The shortcut key for hold and unhold of the selected session is Space.
309 6 Tijmen de Mes
310 1 Tijmen de Mes
h3. Record
311 152 Saúl Ibarra Corretgé
312 1 Tijmen de Mes
To record click on the _Black circle_. While recording, the circle will toggle between red and black. Recorded sessions can be found in menu _History -&gt; Audio Recordings_.
313 1 Tijmen de Mes
314 1 Tijmen de Mes
h3. Transfer
315 1 Tijmen de Mes
316 1 Tijmen de Mes
To blindly transfer a call, just drag it to a contact in the Contacts list. You can also enter a number or address in the search bar, to transfer a call to an arbitrary address.
317 1 Tijmen de Mes
318 6 Tijmen de Mes
To perform an assisted call transfer, first establish a call to each party. Then, click on the T button for completing the transfer, a contextual menu is presented.
319 6 Tijmen de Mes
320 36 Tijmen de Mes
h3. Call History
321 8 Tijmen de Mes
322 61 Adrian Georgescu
History of previous sessions is available in the _History_ menu. If you have registered a SIP Account with Blink, you can review the missed calls while Blink was off-line in _Account-&gt; Settings on SIP Server -&gt; History_ menu.
323 1 Tijmen de Mes
324 33 Tijmen de Mes
h3. Redial
325 6 Tijmen de Mes
326 6 Tijmen de Mes
To redial the last session type Command-R, to redial a previous session select it in the History menu.
327 1 Tijmen de Mes
328 1 Tijmen de Mes
h3. iTunes Integration
329 33 Tijmen de Mes
330 33 Tijmen de Mes
iTunes automatically pauses playing before any _Audio Call_ pauses and resumes playing after all _Audio Calls_ have finished. This functionality does not work when Blink runs in Sandbox mode (starting with Pro version 1.9.0 and Lite version 1.7.0) due to Apple imposed restrictions.
331 6 Tijmen de Mes
332 6 Tijmen de Mes
h3. Audio Information
333 6 Tijmen de Mes
334 75 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-ICE.jpg!
335 75 Adrian Georgescu
336 36 Tijmen de Mes
Audio Calls have status indication about the progress of establishment of the RTP stream and ICE negotiation, the negotiated codec and the presence of encryption for signaling and media.
337 8 Tijmen de Mes
338 38 Tijmen de Mes
The RTP end-points and negotiated ICE candidates (when ICE negotiation succeeded) are displayed when hovering the mouse over the Audio codec information area.
339 22 Tijmen de Mes
340 6 Tijmen de Mes
h3. Phone Numbers
341 1 Tijmen de Mes
342 33 Tijmen de Mes
To dial a phone number, just enter the number in the _Search Box_ followed by Enter or Return key.
343 6 Tijmen de Mes
344 33 Tijmen de Mes
When dialing numbers by selecting entries from the Address Book it is recommended that you store your numbers in international E.164 format (that is + sign followed by the country code then the subscriber number).
345 1 Tijmen de Mes
346 6 Tijmen de Mes
You can set in the account _Advanced -&gt; Phone Numbers_ preferences section how to replace the + sign with another prefix recognized by your SIP service provider or PBX. For example if you set _Replace Starting +_ with 001, when you dial +44XXX the number will be dialed as 00144XXX.
347 6 Tijmen de Mes
348 1 Tijmen de Mes
Optionally, phone numbers can be also prefixed before dialing out, for example if a 9 is required by your PBX by setting the _External Line Prefix_ option.
349 6 Tijmen de Mes
350 33 Tijmen de Mes
If you have created a SIP Account with Blink, you can call to PSTN numbers if you must have a positive credit. You can use a Credit Card to add _Credit_ to your SIP Account in menu _Tools -&gt; Call To Phone Numbers..._. You may request the assignment of a PSTN Caller Id by opeing a ticket in the server support interface. Recognized number formats are + or _00_ followed by the _Country Code_ and then _Subscriber Number_.
351 1 Tijmen de Mes
352 33 Tijmen de Mes
If you use another SIP Account than the one provided by Blink, access to the PSTN is subject to the support provided by your SIP service provider. The number format depends as well on the conventions imposed by the SIP service provider in question.
353 6 Tijmen de Mes
354 6 Tijmen de Mes
h3. Voicemail
355 1 Tijmen de Mes
356 1 Tijmen de Mes
Voicemail is a feature provided for SIP accounts created by Blink. It is provided by the network while Blink is offline, when the call forwarding to Voicemail is activated. To change the settings of your SIP2SIP voicemail box dial _1233_. You can record your unavailable message and listen to your messages stored on the server. The voicemail delivered method (by email attachement or by dialing into the server) is set in menu _Tools -&gt; Settings on SIP server_ in the Voicemail section.
357 6 Tijmen de Mes
358 88 Adrian Georgescu
h3. Answering Machine
359 88 Adrian Georgescu
360 88 Adrian Georgescu
When the _Answering Machine_ is enabled, Audio Call requests will be automatically answered with either the standard or the custom recorded message after the delay configured set in _Preferences -&gt; Answering Machine_ settings.
361 88 Adrian Georgescu
362 6 Tijmen de Mes
You can enable the _Answering Machine_ using the menu item _Tools -&gt; Enable Answering Machine_. The incoming Audio Calls are then recorded and can be listened to later in _Tools -&gt; Recordings_ menu.
363 116 Adrian Georgescu
364 116 Adrian Georgescu
While the _Answering Machine_ is handling an Audio Call, you can hear what the remote party is speaking while your microphone is muted. If you wish you can take over by clicking on the _Green Handset_ icon in the Audio drawer. The recording stops and the session is connected to the microphone.
365 116 Adrian Georgescu
366 116 Adrian Georgescu
h3. Audio Conference
367 76 Adrian Georgescu
368 120 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-AudioConference.jpg!
369 120 Adrian Georgescu
370 120 Adrian Georgescu
Drag and drop _Audio Calls_ on top of each other to create a "Conference":http://icanblink.com/screenshots.phtml#audio_conference or use the button presented at the botton at the _Audio Drawer_ to start a _Conference_ with all active _Audio Calls_.
371 120 Adrian Georgescu
372 6 Tijmen de Mes
Add new participants to a Conference by dragging Contacts from the _Contacts list_ onto an _Audio Call_.
373 124 Adrian Georgescu
374 124 Adrian Georgescu
Each participant can be muted individually by pressing on the microphone symbol that appears on each conferenced session.
375 124 Adrian Georgescu
376 124 Adrian Georgescu
To end an _Audio Conference_ drag the session out of the conference area or press the _Conference_ button again.
377 6 Tijmen de Mes
378 36 Tijmen de Mes
There can be only one active _Audio Conference_ at any given time.
379 9 Tijmen de Mes
380 132 Adrian Georgescu
h2. Chat Sessions
381 132 Adrian Georgescu
382 132 Adrian Georgescu
Chat sessions work like Audio Calls in the sense that a session is established after the called party explicitly accepts the invitation and for each message there is a delivery report available.  This is different to Send Message, which is a fire and forget action with no guarantees of the delivery.
383 132 Adrian Georgescu
384 6 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ServerConference.jpg!
385 6 Tijmen de Mes
386 6 Tijmen de Mes
_Chat Sessions_ are displayed into the "Chat window":http://icanblink.com/screenshots.phtml#chat_sessions. For each recipient there is a new Tab created at the bottom of the window. The Tabs are matched based on the SIP Address of the recipient and the _Chat Aliases_ configured for the Contacts.
387 1 Tijmen de Mes
388 135 Adrian Georgescu
The lateral drawer display the active participants present in the chat session or multi-party conference.
389 135 Adrian Georgescu
390 135 Adrian Georgescu
_Chat Sessions_ are encrypted using TLS and handled like the _Audio Sessions_, a _Chat Session_ is established only to the device where the user accepts the session. _Chat sessions_ can carry arbitrarily large amounts of text information.
391 135 Adrian Georgescu
392 33 Tijmen de Mes
You can start a _Chat Session_ by right-clicking on a _Contact_ and chose _Start Chat Session_.
393 9 Tijmen de Mes
394 1 Tijmen de Mes
Messages typed before the session is accepted by the remote party are queued and delivered once the session has been established. If the session fails to establish, the undelivered messages will be resent at the next successful attempt.
395 140 Adrian Georgescu
396 140 Adrian Georgescu
Message marked with a red color background have failed to be delivered.
397 140 Adrian Georgescu
398 140 Adrian Georgescu
To an established _Chat Session_ you can add _Audio_ or start a _Screen Sharing_ session by clicking on the buttons presented on the toolbar.
399 33 Tijmen de Mes
400 6 Tijmen de Mes
To review previous chat conversations go to menu _History -&gt; Chat Conversations_.
401 1 Tijmen de Mes
402 6 Tijmen de Mes
To insert an empty line use Shift-Enter combination.
403 18 Tijmen de Mes
404 36 Tijmen de Mes
The rendering of Emoticons can be disabled in each chat window, this can be useful to transfer programming code snippets without interpreting the special characters as emoticons.
405 147 Adrian Georgescu
406 147 Adrian Georgescu
h2. Presence
407 147 Adrian Georgescu
408 147 Adrian Georgescu
Presence is a complex topic as it requires specialized infrastructure not all SIP providers posses. See http://projects.ag-projects.com/news/15
409 9 Tijmen de Mes
410 6 Tijmen de Mes
h2. Short Messages
411 1 Tijmen de Mes
412 1 Tijmen de Mes
_Short Messages_ is the way to interact with legacy SIP IM clients that do not support session based _Chat Sessions_ using MSRP protocol. 
413 1 Tijmen de Mes
414 1 Tijmen de Mes
_Short Messages_ are stand-alone entities that operates in a fire and forget fashion. There is no guarantee for delivery or alerting of the final recipient. _Short Messages_ end-up on all SIP devices registered for the remote SIP Account, including hardware phones that accept such messages but do not display them, the recipient has no control where to receive them.
415 1 Tijmen de Mes
416 1 Tijmen de Mes
_Short Messages_ have no end-to-end delivery report and cannot be encrypted the way Chat Sessions are. For guaranteed message delivery and encryption you must use Chat Sessions.
417 1 Tijmen de Mes
418 1 Tijmen de Mes
A _Short Message_ cannot exceed 1300 characters on IP networks and 160 on PSTN mobile networks.
419 1 Tijmen de Mes
420 1 Tijmen de Mes
You can send a _Short Message_ by right-clicking on a _Contact_ and chose _Send SMS_.
421 1 Tijmen de Mes
422 1 Tijmen de Mes
Previous exchanged messages can be reviewed in the menu _Window -&gt; Chat History_.
423 36 Tijmen de Mes
424 1 Tijmen de Mes
h2. File Transfers
425 1 Tijmen de Mes
426 1 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-FileTransfer.jpg!
427 38 Tijmen de Mes
428 1 Tijmen de Mes
To send a file you can use drag and drop from Finder or other application like iPhoto onto a Contact, to a Chat Window or by right clicking on a Contact and then selecting _Send File..._ option.
429 1 Tijmen de Mes
430 1 Tijmen de Mes
_File Transfers_ are displayed in a "separate window":http://icanblink.com/screenshots.phtml#file_transfers. Each file has a progress bar attached with estimated transfer speed and remaining time.
431 1 Tijmen de Mes
432 1 Tijmen de Mes
h2. Screen Sharing
433 1 Tijmen de Mes
434 1 Tijmen de Mes
Screen Sharing is implemented by using standard VNC protocol over an MSRP connection. The minimum bandwidth required for a reasonable experience us 1 Mbit/s. Make sure that all debugging is disabled during Screen Sharing as it can overload the CPU.
435 1 Tijmen de Mes
436 1 Tijmen de Mes
The party sharing the Screen must have enabled _Screen Sharing_ in _System Preferences_ and set the option _Anyone may request permission to control screen_ in Computer Settings section of the _Share Screen_ panel.
437 1 Tijmen de Mes
438 1 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingServerSetup.jpg!
439 1 Tijmen de Mes
440 1 Tijmen de Mes
441 1 Tijmen de Mes
h3. Screen Sharing Party
442 1 Tijmen de Mes
443 1 Tijmen de Mes
First Blink alerts the user about an incoming request for Screen Sharing. If accepted, MacOSX VNC server will asks to confirm the Screen Sharing request. The request originates from the localhost (127.0.0.1) as the connection runs through Blink.
444 33 Tijmen de Mes
445 6 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingServerConfirmation.jpg!
446 6 Tijmen de Mes
447 33 Tijmen de Mes
448 6 Tijmen de Mes
h3. Screen Viewer Party
449 33 Tijmen de Mes
450 6 Tijmen de Mes
The party asking for Screen Sharing must select the option 'Connect by Asking for Permission' when prompted by the VNC viewer.
451 16 Tijmen de Mes
452 6 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingClientRequest.jpg!
453 36 Tijmen de Mes
454 6 Tijmen de Mes
455 38 Tijmen de Mes
h2. NAT Traversal
456 1 Tijmen de Mes
457 6 Tijmen de Mes
For NAT traversal you must rely on your SIP service provider. In general, every SIP service provides relaying for both signaling and media, which takes care of the NAT issue. This means that no special settings are necessary in the client.
458 6 Tijmen de Mes
459 25 Tijmen de Mes
h3. Audio
460 1 Tijmen de Mes
461 6 Tijmen de Mes
For _Audio Calls_ you can enable the use of ICE negotiation in _Advanced -&gt; NAT Traversal -&gt; Use ICE_. ICE requires the presence of STUN servers, they must be provided by the SIP service provider. The ICE negotiation details are displayed in "RTP Logs window":http://icanblink.com/screenshots.phtml#logs_ice. While the ICE negotiation progresses, its status is also displayed in the Audio Call information, for example the gathering of ICE the candidates and the probing of the remote candidates.
462 1 Tijmen de Mes
463 33 Tijmen de Mes
Once the audio stream is established, the audio information area is updated with the negotiated codec type and the sample rate. The active RTP end-points and the ICE candidates types are displayed while "hovering the mouse":http://icanblink.com/screenshots.phtml#rtp_endpoints over the audio status information area.
464 6 Tijmen de Mes
465 6 Tijmen de Mes
h3. IM and File Transfers
466 1 Tijmen de Mes
467 33 Tijmen de Mes
To traverse the NAT for MSRP related sessions (Instant Messaging, File Transfer) a "MSRP relay":http://msrprelay.org configured for the called party domain is needed. The SIP service provider that provides the SIP Account must support this feature (e.g. http://sip2sip.info).
468 1 Tijmen de Mes
469 24 Tijmen de Mes
h3. Screen Sharing
470 6 Tijmen de Mes
471 33 Tijmen de Mes
To traverse the NAT for Screen Sharing sessions a "MSRP relay":http://msrprelay.org configured for the called party domain is needed. The SIP service provider that provides the SIP Account must support this feature (e.g. http://sip2sip.info).
472 9 Tijmen de Mes
473 6 Tijmen de Mes
h2. Growl Notifications
474 1 Tijmen de Mes
475 101 Adrian Georgescu
Growl notifications are raised for missed sessions and the Dock Icon badge is updated with the number of missed sessions.
476 6 Tijmen de Mes
477 116 Adrian Georgescu
When sessions are accepted elsewhere and the SIP server supports the Reason header, the sessions will be logged in the incoming section rather than the missed section.
478 116 Adrian Georgescu
479 116 Adrian Georgescu
h2. Logs
480 116 Adrian Georgescu
481 116 Adrian Georgescu
"Logs Window":http://icanblink.com/screenshots.phtml#logs helps troubleshoot network traffic for various protocols used by Blink. For example, one can follow in the self scrolling interface the time sequence of all DNS lookups and SIP messages exchanged with the other end-points.
482 120 Adrian Georgescu
483 120 Adrian Georgescu
To see what Blink is doing under the hood go to the menu _Window -&gt; Logs_. It is advisable not to leave MSRP Trace and Notifications Logs turned on unless you really need them for debugging purposes, they are very demanding in terms of CPU load during File Transfer and Screen Sharing sessions.
484 120 Adrian Georgescu
485 120 Adrian Georgescu
h2. Server Settings
486 120 Adrian Georgescu
487 124 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-DND.jpg!
488 124 Adrian Georgescu
489 124 Adrian Georgescu
Blink is integrated with the SIP2SIP server functionality. One can change settings directly on the SIP server like Call Forwarding, Do Not Disturb, list of last missed sessions and other settings.
490 124 Adrian Georgescu
491 124 Adrian Georgescu
The settings are displayed in "Server Settings window":http://icanblink.com/screenshots.phtml#server_settings. The window is actually a web interface that loads the URL configured in the _Advanced -&gt; Server -&gt; Settings URL_ for each SIP Account. The remote web server can support digest authentication, Blink sends the SIP Account credentials when prompted by the server.
492 124 Adrian Georgescu
493 124 Adrian Georgescu
h2. Audio Devices
494 132 Adrian Georgescu
495 132 Adrian Georgescu
Blink auto-detects audio devices there are plugged in and out on the fly and prompts the user to switch to a new added device. You can switch automatically by setting this option in Preferences -&gt; Audio section.
496 132 Adrian Georgescu
497 132 Adrian Georgescu
To selected a particular audio device use the menu _Audio_.
498 132 Adrian Georgescu
499 132 Adrian Georgescu
h2. Preferences
500 132 Adrian Georgescu
501 132 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-Preferences.jpg!
502 135 Adrian Georgescu
503 135 Adrian Georgescu
To change Blink configuration go to menu _Preferences_. The Preferences "window":http://icanblink.com/screenshots.phtml#preferences appears.
504 135 Adrian Georgescu
505 135 Adrian Georgescu
Find out more information about a particular setting by hovering the mouse over it.
506 135 Adrian Georgescu
507 135 Adrian Georgescu
Each SIP Account has advanced options available, to reveal them click on the small triangle presented under the SIP Address.
508 135 Adrian Georgescu
509 140 Adrian Georgescu
Blink preferences are stored in _~/Library/Application Support/Blink Pro_ folder. You can reset Blink by deleting this folder.
510 140 Adrian Georgescu
511 140 Adrian Georgescu
Blink SIP accounts and settings are stored in _~/Library/Application Support/Blink Pro/config_ file.
512 140 Adrian Georgescu
513 140 Adrian Georgescu
GUI preferences are stored in _~/Library/Preferences/com.agprojects.Blink.plist_ file. (e.g. size, location of the windows and other MacOSX related settings).
514 140 Adrian Georgescu
515 140 Adrian Georgescu
If you ever want to move your Blink configuration to another login account you must edit the content of your _config_ file and replace the absolute file paths accordingly. You can edit this file with any text editor as long as you do not break the return lines and formatting of the file.
516 140 Adrian Georgescu
517 140 Adrian Georgescu
h3. Codecs
518 140 Adrian Georgescu
519 147 Adrian Georgescu
Blink supports _G722_ and _Speex_ wide-band codecs. The order of the codecs can be configured in menu _Preferences -&gt; Advanced -&gt; RTP Media_ and for each SIP Account in _Preferences -&gt; Accounts -&gt; Advanced -&gt; RTP Media_.
520 147 Adrian Georgescu
521 147 Adrian Georgescu
h3. Open Browser on Incoming Call
522 147 Adrian Georgescu
523 147 Adrian Georgescu
You can configure Blink Pro to automatically open a web browser on an incoming call event. For this set the _Alert URL_ in _Preferences -&gt; Accounts -&gt; Selected Account -&gt; Advanced -&gt; Web Alert_ section.
524 147 Adrian Georgescu
525 147 Adrian Georgescu
The URL may contain the following variables that will be replaced with the actual information from the incoming session:
526 147 Adrian Georgescu
527 147 Adrian Georgescu
* $caller&#95;party - the SIP address of the caller party
528 147 Adrian Georgescu
* $caller&#95;username - the username part of the SIP address of the caller party
529 147 Adrian Georgescu
* $called&#95;party - the SIP address of the account being called
530 147 Adrian Georgescu
531 147 Adrian Georgescu
Example: http://www.example.com?caller=$caller&#95;party&amp;called=$called&#95;party
532 147 Adrian Georgescu
533 147 Adrian Georgescu
The web page can be opened when call comes in or after it was answered. 
534 147 Adrian Georgescu
535 1 Tijmen de Mes
The web page can be opened in a Blink window or in the default web browser (check option in _Preferences -&gt; Advanced -&gt; GUI Settings_)
536 1 Tijmen de Mes
537 1 Tijmen de Mes
h2. History Database
538 1 Tijmen de Mes
539 1 Tijmen de Mes
Blink stores the history of sessions and chat messages in a Sqlite database. The location of the database is:
540 1 Tijmen de Mes
541 1 Tijmen de Mes
<pre>
542 1 Tijmen de Mes
~/Library/Application Support/Blink Pro/history/history.sqlite
543 1 Tijmen de Mes
</pre>
544 1 Tijmen de Mes
545 1 Tijmen de Mes
546 1 Tijmen de Mes
If for any reason the database becomes corrupted, which may manifest itself by errors reported graphically by Blink itself or in the Console application you may work around the problems in several ways.
547 1 Tijmen de Mes
548 1 Tijmen de Mes
First, backup your database in case you need the uncorrupted data in the future. You can do this by copying the history.sqlite file to another location. The file can be opened in *Terminal* application using *sqlite3* program. You can dump the old data in the corrupted database as follows:
549 1 Tijmen de Mes
550 1 Tijmen de Mes
<pre>
551 1 Tijmen de Mes
#:~/Library/Application Support/Blink Pro/history$sqlite3 history.sqlite 
552 1 Tijmen de Mes
SQLite version 3.7.7 2011-06-25 16:35:41
553 1 Tijmen de Mes
Enter ".help" for instructions
554 1 Tijmen de Mes
Enter SQL statements terminated with a ";"
555 1 Tijmen de Mes
sqlite> select * from sessions;
556 1 Tijmen de Mes
sqlite> select * from chat_messages;
557 1 Tijmen de Mes
</pre>
558 1 Tijmen de Mes
559 1 Tijmen de Mes
560 1 Tijmen de Mes
h3. Restore Procedure
561 1 Tijmen de Mes
562 1 Tijmen de Mes
Try the following in this order to solve a data corruption problem:
563 1 Tijmen de Mes
564 1 Tijmen de Mes
* Clear the session history table, go to menu _History-&gt; Clear History_. The session table will be emptied and the chat messages are not affected. Restart Blink.
565 1 Tijmen de Mes
* Stop Blink. Remove history.sqlite file, the history database will be recreated at start time. Use the backup file for reading the old data using the sqlite3 command line utility.